Manguera de silicona estándar

Standard Silicone Hose — Specifications & Estándares

1. Product Specifications

Replace the above values with actual test data when preparing a product-specific spec sheet.

2. Applicable Standards

2.1 Automotor / Industrial General

SAE J20 — the core industry standard for silicone coolant and heater hose.

• SAE J20 R1 Class A: Silicone radiator and coolant hose; covers performance and physical property requirements. Hoses meeting this standard typically also satisfy TMC RP303B and MILSPEC A-A-52426.

• MILSPEC A-A-52426: Military specification, frequently cited alongside SAE J20 for heavy-duty and military vehicle silicone hose.

• GB/T 18948-2025 (Chinese national standard): Rubber hoses and pure rubber tubing for automotive cooling systems — specification, modified adoption of ISO 4081:2016. Applicable to cooling circuits of internal combustion engine or electric vehicles with a gross vehicle weight below 3.5 t.

2.2 Food-Contact (donde se aplica)

FDA 21 CFR 177.2600 — “Rubber articles intended for repeated use.” This regulation lists silicone elastomer types acceptable for food-contact use, including methyl, methyl+vinyl, and methyl+phenyl silicone rubbers. MVQ (methyl vinyl silicone rubber) falls within the scope of this section.

Compliance with 21 CFR 177.2600 requires passing the relevant extraction tests (P.EJ., chloroform-soluble extractives limits). Material type alone does not constitute a compliance claim.

2.3 Aerospace / Specialty (donde se aplica)

• SAE AS4468G: 125 psi lined silicone hose assemblies for aircraft potable water systems, with an all-fluoropolymer liner.

• SAE AS5420G: Heated lined silicone hose assemblies for aircraft potable water systems.

These standards apply only when the product holds the corresponding qualification; they are not applicable to general-purpose industrial Standard Silicone Hose.

3. Suggested Product-Page Copy

Standard Silicone Hose — Specifications & Cumplimiento

Material: Methyl vinyl silicone rubber (MVQ), meeting the silicone elastomer definition under 21 CFR 177.2600.

Construcción: Smooth bore and cover, no reinforcement (standard duty).

Rango de temperatura: -65°F a +350°F (-54°C a +177°C).

Applicable Standards:

• SAE J20 R1 Class A — performance and physical characteristics for silicone coolant hose

• MILSPEC A-A-52426 — where applicable

• FDA 21 CFR 177.2600 compliant formulations available for food-contact applications

Nota: Not recommended for mineral oil or solvent service. Para variantes reforzadas o de alta temperatura, consulte las respectivas subcategorías.

4. Nota sobre las lagunas de datos

Valores de rendimiento detallados de SAE J20 (presión de estallido, resistencia a la tracción, conjunto de compresión, etc.) no se reproducen íntegramente en resúmenes disponibles públicamente. Para una tabla de especificaciones completa, consulte el texto de la norma SAE J20 directamente o solicite un informe de prueba de conformidad al proveedor. El marco anterior es adecuado para citas estándar y estructura de página de producto., pero no se deben fabricar cifras de prueba específicas.